| General Specifications | ||
| Display | LCD size:56.4 X 52.9 mm. LCD with green backlight ( ON /OFF ) | |
| Test frequency | 100 Hz/120 Hz/1 KHz/10 KHz/100 KHz | |
| Function | L/C/R Function selector Frequency selector D/Q/θ/ESR selector Sorting mode selector Backlight | |
| Dissipation factor | 0.000 to 999 | |
| Quality factor | 0.000 to 999 | |
| θ measurement | ± 90° | |
| Sorting tolerance mode | ±0.25%, ±0.5%, ±1%, ±2%, ±5% ±10%, ±20%, +80% -20% |
|
| Calibration | Open/Short calibration | |
| Data Hold | Freeze the display reading | |
| Data output | RS232/USB PC computer interface | |
| Power off | Auto shut off saves battery life or manual off by push button | |
| Operating temperature | 0°C to 50°C | |
| Operating humidity | Less then 85% R.H. | |
| Power consumption | DC 35 mA approximately | |
| Dimension | 193 x 88 x 41mm | |
| Weight | 420 g * meter only |
|
| Standard Accessories Included | *Instruction manual........................1 PC | |
| Optional Accessories | SMD tester, SMDA-22 SMD test clip, SMDC-21 Holster, HS-03 AC to DC 9V adapter Hard carrying case, CA-06 Soft carrying case, CA-05A |
|
- Model : LCR-9184
- Auto LCR smart check and measurement.
- 100 Hz/120 Hz/1 KHz/10 KHz/100 KHz
- Test ranges : (ex : F = 1 KHz)
- L : 200.00 uH to 2000.0 H
- C : 2000.0 pF to 2.000 mF
- R : 20.000 to 200.0 M
- Series/Parallel modes are selectable.
- DCR mode 200.00 to 200.0M
- Ls/Lp/Cs/Cp with D / Q / / ESR Parameter.
- RS232/USB computer interface.
- Optional data acquisition software, SW-E803.
- Optional SMD test clips, SMDC-21.
- Optional SMD tester, SMDA-22.
Comments are closed.


